Greenbeams CMH Reflector With Phantom CMH Ballast and 3100K Lamp
Greenbeams lighting increases plant yields by its unique ability to deliver wall-to-wall uniform light intensity over the full plant canopy. This is achieved by the geometry of its patented reflector. It collects the photons from a vertically mounted Philips 315W CMH lamp and distributes them in a uniform 360-degree radial distribution pattern. This light is purposefully reflected off the grow room walls to deliver uniform intensity onto full canopy of the perimeter and interior plants.
- Uniform plant growth wall to wall Geometry
- No hot spots throughout room
- 92.6% luminaire efficacy
- Cuts electricity cost 35% vs. 1000W HPS
- Cuts A/C operating costs 50%
- Removes requirement to rotate plants
- Eliminates need of raising/lowering reflector
Greenbeams CMH Reflector With Phantom CMH Ballast and 4200K Lamp
Greenbeams lighting increases plant yields by its unique ability to deliver wall-to-wall uniform light intensity over the full plant canopy. This is achieved by the geometry of its patented reflector. It collects the photons from a vertically mounted Philips 315W CMH lamp and distributes them in a uniform 360-degree radial distribution pattern. This light is purposefully reflected off the grow room walls to deliver uniform intensity onto full canopy of the perimeter and interior plants.
- Uniform plant growth wall to wall Geometry
- No hot spots throughout room
- 92.6% luminaire efficacy
- Cuts electricity cost 35% vs. 1000W HPS
- Cuts A/C operating costs 50%
- Removes requirement to rotate plants
- Eliminates need of raising/lowering reflector
Phantom 2 CMH Ceramic Metal Halide Digital Ballast 315W 120/240V
- Low Frequency, square wave technology provides greater current stability and consistency in output levels, as well as low acoustic resonance
- Up to 30' lamp striking distance: Separate the ballast from your reflector by 30' of distance if needed (optional lamp cord extensions may be needed)
- Multi-volt capability: Can be run at either 120V or 240V
- Includes short circuit protection, open circuit protection, overvoltage protection, under voltage protection, overcurrent protection, hot lamp startup protection, lightning protection, overheat protection, lamp failure protection, and lamp life warning
- 8-foot power cord included
Phantom 2 CMH Ceramic Metal Halide Digital Ballast, 315W, 277V
- Low Frequency, square wave technology provides greater current stability and consistency in output levels, as well as low acoustic resonance
- Up to 30' lamp striking distance: Separate the ballast from your reflector by 30' of distance if needed (optional lamp cord extensions may be needed)
- Compatible with 277V operation
- Includes short circuit protection, open circuit protection, overvoltage protection, under voltage protection, overcurrent protection, hot lamp startup protection, lightning protection, overheat protection, lamp failure protection, and lamp life warning
- 8-foot power cord included
Phantom CMH Reflector Ballast And Lamp Kit 3100K
Phantom's CMh System combines the Phantom CMh reflector with the multi-voltage Phantom ceramic halide-specific digital ballast, and the Philips double-jacketed Master Power CDM Elite Agro 315W T12 ceramic metal halide lamp.
High efficiency along with high intensity and cutting-edge performance make the Phantom CMh System a smart choice.
- Excellent PPF (Photosynthetic Photon Flux) 1.95 µmol/s
- Longevity 90% PAR output at 8,000 hours and 20,000-hour average life
- Horticulturally-optimized spectrum and increased UV promote enhanced plant quality
- 3100K lamp included
- Double jacketed lamp does not require reflector safety lens
- Digital ballast features low frequency, square wave technology
- Multi-voltage: 120/208/240V
- Ideal for low ceilings/tents/vertical gardens
- 95% reflective European hammertone aluminum specular
Phantom CMH Reflector Ballast And Lamp Kit 4200K
Phantom's CMh System combines the Phantom CMh reflector with the multi-voltage Phantom ceramic halide-specific digital ballast, and the Philips double-jacketed Master Power CDM Elite Agro 315W T12 ceramic metal halide lamp.
High efficiency along with high intensity and cutting-edge performance make the Phantom CMh System a smart choice.
- Excellent PPF (Photosynthetic Photon Flux) 1.95 µmol/s
- Longevity 90% PAR output at 8,000 hours and 20,000-hour average life
- Horticulturally-optimized spectrum and increased UV promote enhanced plant quality
- 3100K lamp included
- Double jacketed lamp does not require reflector safety lens
- Digital ballast features low frequency, square wave technology
- Multi-voltage: 120/208/240V
- Ideal for low ceilings/tents/vertical gardens
- 95% reflective European hammertone aluminum specular
Phanton 315W CMH Reflector
- Intense downward light pattern,
- European hammertone aluminum for excellent light uniformity and diffusion.
- Patented double-wall design maintains optimum lamp temperature while keeping the reflector cool.
- Vertical lamp optimizes downward light delivery
- Multifaceted design provides superior uniformity, maximum output, and top performance
- Integrated hangers
- Built-in 15' cord set
- Pre-galvanized powder coated body for durability, strength, and longevity
Sunburst CMH 120/240V W/Lamp 315W 3100K
The Sunburst CMh system combines the Sunburst and Phantom CMh into a single unit that brings the benefits of ceramic metal halide lighting to all applications, small and large, in the Sunburst's compact, all-in-one format.
- Compact, all-in-one design
- 3100K CMh Lamp included
- Runs 315W ceramic metal halide lamp
- 95% European hammertone aluminum reflector interior
- Vented design for maximum heat dissipation
- Dual input voltage 120-240V
Sunburst CMH 120/240V w/ Lamp 315W
The Sunburst CMh system combines the Sunburst and Phantom CMh into a single unit that brings the benefits of ceramic metal halide lighting to all applications, small and large, in the Sunburst's compact, all-in-one format.
Features:
- Compact, all-in-one design
- 4200K CMh Lamp included
- Runs 315W ceramic metal halide lamp
- 95% European hammertone aluminum reflector interior
- Vented design for maximum heat dissipation
- Dual input voltage 120-240V
Xtrasun 315W CMH Aluminum Reflector
The Xtrasun XT315AW reflector & cord set kit is the optimal choice for a ceramic halide reflector if you seek professional performance at the best possible price. It is ready to be combined with a CMh 315W ceramic metal halide lamp (not included) and a CMh 315W digital ballast (not included).
- Intense downward light pattern from a vertically positioned ceramic halide lamp.
- Adjust the light spread based on your specific need.
- 95% reflective European hammertone aluminum gives excellent light uniformity and diffusion.
- Vertical lamp orientation optimizes downward light delivery
- Built-in 15' cord set